ZyXEL ZYAIR G-2000 Manuel d'utilisateur télécharger pdf (Page 15)

ZyAIR G-2000 802.11g Wireless 4-port Router

4. Fill in the fields in the last wizard configuration screen.

WAN IP Address Assignment

Select Get automatically from ISP

to have the ZyAIR obtain an IP

address automatically from the ISP.

Select Use fixed IP address to

give the ZyAIR a fixed, unique IP

address. Enter a subnet mask

appropriate to your network and the

gateway IP address if applicable.

DNS Server Assignment

Select Get automatically from ISP

if your ISP does not give you DNS

server addresses.

If you selected the Use fixed IP

address – Primary/Secondary

DNS Server option, enter the

provided DNS addresses in these

fields.

WAN MAC Address

The WAN MAC address field allows you to configure the WAN port's MAC address by either using the factory default or

cloning the MAC address from a computer on your LAN. Select Factory Default to use the factory assigned default MAC

address. Alternatively, select Spoof this Computer's MAC address - IP Address and enter the IP address of the

computer on the LAN whose MAC address you are cloning

5. In the final screen, click Finish and change the wireless parameter settings in the wireless

stations to match those of the ZyAIR. Refer to the user’s guide for your wireless adapter.

4.4 Test Your Internet Connection

Launch your web browser and navigate to www.zyxel.com. You don’t need a dial-up program such as Dial

Up Networking. Internet access is just the beginning. Refer to the User’s Guide for more detailed

information on the complete range of ZyAIR features.

5 Hardware Installation

5.1 Attaching Antennas

Follow the steps below to connect the supplied antennas.

1. Locate the antenna connectors on the sides of your ZyAIR.

2. Screw the antennas clockwise onto the antenna connectors. The antennas should be

perpendicular to the ground and parallel to each other.

1 2 ... 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

ZyXEL ZYAIR G-2000 Manuel d'utilisateur Page 15