ZyXEL ZyAIR G-500 Manuel d'utilisateur télécharger pdf (Page 6)

ZyAIR G-500 802.11g Wireless Access Point

Table 1 ZyAIR Front Panel LED Description

LED COLOR STATUS DESCRIPTION

Blinking The ZyAIR is not ready or rebooting.

On The ZyAIR has a successful reboot and is receiving power.

PWR/SYS Green

Off The ZyAIR is not receiving power.

Off The ZyAIR does not have an Ethernet connection.

On The ZyAIR has a successful 10Mbps Ethernet connection. Green

Blinking The ZyAIR is sending/receiving data.

On The ZyAIR has a successful 100Mbps Ethernet connection.

ETHN

Amber

Blinking The ZyAIR is sending/receiving data.

Blinking The ZyAIR is sending or receiving data through the wireless LAN. WLAN

Green

On The ZyAIR is ready, but is not sending/receiving data.

To access the ZyAIR, configure your computer’s IP address and subnet mask to be in the same range as the

ZyAIR’s.

The default IP address of the ZyAIR is 192.168.1.2.

3 Set Up Your Computer’s IP Address

Skip this section if your computer’s IP address is already in the range of

192.168.1.3 ~ 192.168.1.254 with subnet mask 255.255.255.0.

Your computer must have a network card and TCP/IP installed. TCP/IP should already be installed on

computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. Refer to the Setting

Up Your Computer’s IP Address appendix in the User’s Guide for other operating systems.

3.1 Windows 2000/NT/XP

1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control

Panel.

2. In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

ZyXEL ZyAIR G-500 Manuel d'utilisateur Page 6