ZyXEL Communications Network Router zyxel Manuel d'utilisateur télécharger pdf (Page 46)

Chapter 5 Universal Repeater Mode

WAP3205 User’s Guide

•Use other Wireless LAN screens (Chapter 10 on page 99) to configure the

wireless settings and wireless security between the wireless clients and the

WAP3205.

5.3 What You Need to Know

With the exception of the Wireless LAN > Universal Repeater screen, other

configuration screens in Universal Repeater mode are similar to the ones in Access

Point Mode. See Chapter 11 on page 117 through Chapter 12 on page 121 of this

User’s Guide.

5.4 Setting your WAP3205 to Universal Repeater

Mode

1 Connect your computer to the LAN port of the WAP3205.

2 The default IP address of the WAP3205 is “192.168.1.2”. In this case, your

computer must have an IP address in the range between “192.168.1.3” and

“192.168.1.254”.

3 Click Start > Run on your computer in Windows. Type “cmd” in the dialog box.

Enter “ipconfig” to show your computer’s IP address. If your computer’s IP

address is not in the correct range then see Appendix C on page 167 for

information on changing your computer’s IP address.

4 After you’ve set your computer’s IP address, open a web browser such as Internet

Explorer and type “http://192.168.1.2” as the web address in your web browser.

5 Enter “1234” (default) as the password and click Login.

6 Type a new password and retype it to confirm, then click Apply. Otherwise, click

Ignore.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 259 260

Pas de commentaire

ZyXEL Communications Network Router zyxel Manuel d'utilisateur Page 46