ZyXEL ACCESSING INTERNET & INTRANET omni series Manuel d'utilisateur Page 100
- Page / 168
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
88 Advanced ISDN Call Control
[FM:[[Prefix]Calling-Party-Number][/Subaddress/]]
[TO:[Called-Party-Number][/Subaddress/]] <CR><LF>
RING <CR><LF>
RING <CR><LF>
......
The display of address information between the first RING and the
second RING can be disabled by setting ATS84.4=1. The term
[Prefix] is a predefined number string to be added in front of the
Calling-party-number before sending it to the DTE. This is useful for
some automatic dial-back-up systems. The number string can be
assigned as follows:
•
ATCI<Prefix> - When and only when the type-of-number
denotes an international number will this "Prefix" be added to the
Calling-party-number before indicating it to the DTE.
• ATCI<> - Disables the international number prefix-adding
function. (Default)
• ATCN<Prefix> - When and only when the type-of-number
denotes a national number will this "Prefix" be added to the
Calling-party-number before indicating it to the DTE.
• ATCN<> - Disable the national number prefix-adding function.
(Default)
O
NOTE: The angle brackets '<' and '>' are part of this command.
Disable inbound call connection
In some cases, the user may desire the TA to not answer any
incoming calls. This can be done by setting the bit 0 of S-register
S118:
• S118.0=0 - Enable the TA to answer a call (by default).
• S118.0=1 - Disable the TA to answer any call.
- User’s Manual 1
- ZyXEL Limited Warranty 2
- FCC Part 15 Information 3
- Contacting ZyXEL 5
- Contents 7
- 1 Introduction 13
- Key to Model Differentiation 14
- Key Features of the omni 14
- Intelligent Features 15
- Technical Specifications 15
- Unpacking Your omni 16
- 6 Introduction 18
- 2 Installing omni External 19
- Back Panel 21
- Connecting to Your Computer 22
- Connecting to Your ISDN Line 24
- Power On and Self Diagnostics 25
- 3 Installing omni Internal 27
- Connecting the TA to your PC 28
- Plug and Play 28
- U Interface Model 31
- S/T Interface 31
- 4 Configuring Your ISDN 33
- 5 ISDN Communication 37
- Supported AT command types: 38
- Outgoing Calls 39
- Internal) 40
- Incoming Calls 41
- Digital Data 42
- Determining the Packet Length 42
- Answering a Call using MSN 43
- Data over Speech Channel 45
- 6 Setup for Windows 95 47
- Networking 50
- CAPI Installation 54
- 7 Point-to-Point Protocol 56
- Feature list 57
- Multilink PPP 59
- Call bumping 59
- Bandwidth On Demand (BOD) 60
- BACP/BAP 61
- 8 V.110 and Synchronous 63
- Making V.110 Calls 64
- V.25bis Command Set 65
- DTR Drop-Dialing Operation 66
- 9 V.120 ISDN 69
- Configuring the V.120 mode 70
- Answering incoming calls 71
- Speeds of 128Kbps 72
- ISDN (1TR6) 75
- 64 V.120 ISDN Communications 76
- 10 X.75 ISDN 77
- Answering an X.75 call 78
- Making an X.75 Call 78
- 70 X.75 ISDN Communications 82
- 11 Handling Analog Calls 83
- Accepting an Incoming Call 85
- Feature Phone (omni.net) 87
- Call Waiting 88
- Placing a second call 88
- Receiving a second call 88
- Call Broker 89
- Call Reject 89
- Call Transfer 89
- Three-way Conference Call 89
- 12 Advanced ISDN Call 91
- AT&ZOx=s. The 93
- Answering a Call 97
- Answering a Call for 1TR6 98
- Best-effort Call Answering 98
- Data Call Indication 99
- RING <CR><LF> 100
- Placing a Call 101
- Placing a call for 1TR6 102
- Leased Line ISDN 103
- 13 Security Functions 105
- Level 1 security 106
- Level 2 security 106
- Level 3 security 106
- Security Functions 97 109
- 14 Upgrading Your omni 110
- Kernel Mode 111
- 15 Diagnostics 112
- Power-on Self-test 113
- The Diagnostic Command (ATCG) 114
- Resetting The omni 115
- Capturing the Protocol Data 116
- Analyzing the Captured Data 117
- Diagnostics 107 119
- 16 AT Command Set 120
- AT Command Descriptions 121
- Description of ATI3 Output: 129
- 124 AT Command Set Reference 136
- 17 Status Registers and 137
- Setting S-registers 138
- S-Register Descriptions 139
- ATS35.7=1<enter> 160
- 18 Phone Jack Pinout 162
- 4. Not Connected 163
- 19 Serial Port Interface 164
- 20 Index 166
- Index 155 167
- Bundled, 62 167
- 156 Index 168
Produits connexes et manuels pour Dispositifs d'accès RNIS ZyXEL ACCESSING INTERNET & INTRANET omni series
(8 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.053 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels