ZyXEL Comet 3356P-LAN Manuel d'utilisateur télécharger pdf (Page 11)

Installation 5

2. Insert the driver diskette into the floppy drive and set to the appropriate drive

(A:\). Then type INSTALL and press Enter.

3. Select Microsoft LAN Manager from the menu screen.

4. Check the card settings. If current settings are correct, select Start Installation

and go to step 5. Otherwise, select Modify Parameters to change settings.

5. Select the appropriate values then press Enter. When you are finished, press OK

to exit.

6. The installation program will install all necessary drivers and modify your

computers AUTOEXEC.BAT and NET.CFG directories.

7. Select Yes then press Enter to modify the files.

8. Reboot your computer and the new settings will take effect.

Example of PROTOCOL.INI:

[PROTMAN]

DRIVERNAME = PROTMAN$

DYNAMIC = YES

PRIORITY = NETBEUI

[NETBEUI_XIF]

Drivername = netbeui$

SESSIONS = 6

NCBS = 12

BINDINGS = "LMNDIS_NIF"

LANABASE = 0

[LMNDIS_NIF]

; protocol.ini session for multifunction

LAN/MODEM driver.

IOADDRESS = 0x320

INTERRUPT = 11

DRIVERNAME = LMNDIS$

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Pas de commentaire

ZyXEL Comet 3356P-LAN Manuel d'utilisateur Page 11