ZyXEL 802.11g Manuel d'utilisateur télécharger pdf (Page 389)

100

101

P-662H/HW-D Series User’s Guide

Appendix E IP Addresses and Subnetting 389

APPENDIX E

IP Addresses and Subnetting

This appendix introduces IP addresses, IP address classes and subnet masks. You use subnet

masks to subdivide a network into smaller logical networks.

Introduction to IP Addresses

An IP address has two parts: the network number and the host ID. Routers use the network

number to send packets to the correct network, while the host ID identifies a single device on

the network.

An IP address is made up of four octets, written in dotted decimal notation, for example,

192.168.1.1. (An octet is an 8-digit binary number. Therefore, each octet has a possible range

of 00000000 to 11111111 in binary, or 0 to 255 in decimal.)

There are several classes of IP addresses. The first network number (192 in the above

example) defines the class of IP address. These are defined as follows:

• Class A: 0 to 127

• Class B: 128 to 191

• Class C: 192 to 223

• Class D: 224 to 239

• Class E:

240 to 255

IP Address Classes and Hosts

The class of an IP address determines the number of hosts you can have on your network.

• In a class A address the first octet is the network number, and the remaining three octets

are the host ID.

• In a class B address the first two octets make up the network number, and the two

remaining octets make up the host ID.

• In a class C address the first three octets make up the network number, and the last octet

is the host ID.

1 2 ... 384 385 386 387 388 389 390 391 392 393 394 ... 495 496

Commentaires sur ces manuels

Pas de commentaire

ZyXEL 802.11g Manuel d'utilisateur Page 389

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau ZyXEL 802.11g