ZyXEL PLA-400 v2 Manuel d'utilisateur télécharger pdf (Page 78)

Appendix A Product Specifications

PLA-4xx Series User’s Guide

" See Table 15 on page 75 for the size of screws to use and how far apart to

place them.

1 Select a high position on a sturdy wall that is free of obstructions.

2 Drill two holes for the screws. The distance between the centers of the holes is listed in

the product specifications appendix.

1 Be careful to avoid damaging pipes or cables located inside the wall when

drilling holes for the screws.

3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm

between the heads of the screws and the wall.

4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of

the PLA-4xx with the connection cables.

5 Align the holes on the back of the PLA-4xx with the screws on the wall. Hang the PLA-

4xx on the screws.

Figure 48 Wall-mounting Example

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 91 92

Pas de commentaire

ZyXEL PLA-400 v2 Manuel d'utilisateur Page 78