Zyxel NWA-3160 Manuel d'utilisateur télécharger pdf (Page 11)

ENGLISH

3.2 Configure IP Settings

The ZyXEL Device is now ready to connect to your switch or router. You can do this now,

or once you have attached the antennas and mounted the ZyXEL Device.

1 You need to set your ZyXEL

Device’s IP address to be in

the same subnet as your

network. Click IP in the

navigation panel.

Select Get automatically from

DHCP if you want to have a

DHCP server on your network

assign an IP address to the

ZyXEL Device.

If you have a specific IP address

to use, select Use fixed IP

address and enter it along with

the subnet mask and gateway

IP address.

Click Apply. The ZyXEL Device

now uses the new IP settings;

you can no longer connect to

the ZyXEL Device using the

default IP address.

" If you change the ZyXEL Device’s IP address, you must use the new IP

address when you next access the web configurator. If you select Get

automatically from DHCP, check your DHCP server to determine the IP

address it assigns to the ZyXEL Device. Refer to your DHCP server’s

documentation for more information.

2 If you changed your computer’s IP address in Section 2.1, return it to its previous

setting.

3 Change the wireless settings in the wireless stations to match those of the ZyXEL

Device. Refer to your wireless adapter’s documentation.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 130 131

Pas de commentaire

Zyxel NWA-3160 Manuel d'utilisateur Page 11