Zyxel NWA-3160 Manuel d'utilisateur télécharger pdf (Page 4)

ENGLISH

1.1 LEDs

•The PWR/SYS LED turns steady green when the power is connected.

•The ETHN LED turns on if the ETHERNET port is properly connected, and blinks when

there is traffic. The LED turns green if the connection is at 10Mbps, and turns yellow if the

connection is at 100Mbps.

V If the ETHN LED does not turn on, check the cable connection to the

ZyXEL Device’s ETHERNET port. Ensure your computer’s network card is

working properly.

2 Access the Web Configurator

" Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later

versions with JavaScript enabled and pop-up blocking disabled.

2.1 Set Up Your Computer’s IP Address

" Note down your computer’s current IP settings before you change them.

1 2 3 4 5 6 7 8 9 ... 130 131

Pas de commentaire

Zyxel NWA-3160 Manuel d'utilisateur Page 4