ZyXEL P-2302R-P1C Manuel d'utilisateur télécharger pdf (Page 53)

P2302R-P1C Support Notes

All contents Copyright  2007 ZyXEL Communications Corporation.

configured. If the ZyXEL Device's DHCP is also enabled, the IP pool for the clients can be any of the three

networks.

ras> ip ro st

Dest FF Len Interface Gateway Metric stat Timer Use

192.168.3.0 00 24 enif0:1 192.168.3.1 1 041b 0 0

192.168.2.0 00 24 enif0:0 192.168.2.1 1 041b 0 0

192.168.1.0 00 24 enif0 192.168.1.1 1 041b 0 0

ras>

Two new protocol filter interfaces in menu 3.2.1 allow you to accept or deny LAN packets from/to the IP alias

1 and IP alias 2 go through the ZyXEL Device. The filter set in menu 3.1 is used for main network configured

in menu 3.2.

 IP Alias Setup

1. Edit the first network in menu 3.2 by configuring the ZyXEL Device's first LAN IP address.

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP= Server TCP/IP Setup:

Client IP Pool:

Starting Address= 192.168.1.33 IP Address= 192.168.1.1

Size of Client IP Pool= 32 IP Subnet Mask= 255.255.255.0

First DNS Server= From ISP RIP Direction= Both

IP Address= N/A Version= RIP-1

Second DNS Server= From ISP Multicast= None

IP Address= N/A Edit IP Alias= Yes

Third DNS Server= From ISP

IP Address= N/A

DHCP Server Address= N/A

Press ENTER to Confirm or ESC to Cancel:

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 144 145

Pas de commentaire

ZyXEL P-2302R-P1C Manuel d'utilisateur Page 53