ZyXEL Communications Network Router NOT AVAILABLE Manuel d'utilisateur télécharger pdf (Page 16)

Chapter 1 Command Line Interface

NXC CLI Reference Guide

 The NXC might force you to log out of your session if reauthentication time,

lease time, or idle timeout is reached. See Chapter 24 on page 169 for more

information about these settings.

1.2.1 Console Port

The default settings for the console port are as follows.

When you turn on your NXC, it performs several internal tests as well as line initialization.

You can view the initialization information using the console port.

• Garbled text displays if your terminal emulation program’s speed is set lower than the

NXC’s.

• No text displays if the speed is set higher than the NXC’s.

• If changing your terminal emulation program’s speed does not get anything to display,

restart the NXC.

• If restarting the NXC does not get anything to display, contact your local customer

support.

Figure 1 Console Port Power-on Display

After the initialization, the login screen displays.

Figure 2 Login Screen

Table 1 Managing the NXC: Console Port

SETTING VALUE

Speed 115200 bps

Data Bits 8

Parity None

Stop Bit 1

Flow Control Off

Flash: 8 MiB

BootModule Version: V0.9.1 | 2012-12-28 13:01:22

DRAM: Size = 1024 Mbytes

DRAM POST: Testing: 262144K

Welcome to NXC

Username:

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 299 300

Pas de commentaire

ZyXEL Communications Network Router NOT AVAILABLE Manuel d'utilisateur Page 16