ZyXEL Communications Network Router NOT AVAILABLE Manuel d'utilisateur télécharger pdf (Page 255)

NXC CLI Reference Guide

255

CHAPTER 38

Session Timeout

Use these commands to modify and display the session timeout values. You must use the

configure terminal command before you can use these commands.

The following example sets the UDP session connect timeout to 10 seconds, the UDP deliver

session timeout to 15 seconds, and the ICMP timeout to 15 seconds.

Table 149 Session Timeout Commands

COMMAND DESCRIPTION

session timeout {udp-connect <1..300> | udp-

deliver <1..300> | icmp <1..300>}

Sets the timeout for UDP sessions to connect or

deliver and for ICMP sessions.

session timeout { tcp-close <1..300> | tcp-

closewait <1..300> | tcp-established

<1..432000> | tcp-finwait <1..300> | tcp-

lastack <1..300> | tcp-synrecv <1..300> | tcp-

synsent <1..300> | tcp-timewait <1..300> }

Sets the timeout for TCP sessions in the

ESTABLISHED, SYN_RECV, FIN_WAIT,

SYN_SENT, CLOSE_WAIT, LAST_ACK, or

TIME_WAIT state.

show session timeout {icmp | tcp | udp} Displays ICMP, TCP, and UDP session timeouts.

Router(config)# session timeout udp-connect 10

Router(config)# session timeout udp-deliver 15

Router(config)# session timeout icmp 15

Router(config)# show session timeout udp

UDP session connect timeout: 10 seconds

UDP session deliver timeout: 15 seconds

Router(config)# show session timeout icmp

ICMP session timeout: 15 seconds

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 299 300

Pas de commentaire

ZyXEL Communications Network Router NOT AVAILABLE Manuel d'utilisateur Page 255