ZyXEL MSAP2000 Manuel d'utilisateur télécharger pdf (Page 127)

127

MSAP2000 AAMS User’s Guide

1 Right-click the Backup Text Configuration Click here link and click Save

Target As. Or:

Click the Backup Text Configuration Click Here link and then click File and

Save as.

2 In the Save As screen, choose a location to save the file on your computer

from the Save in drop-down list box and type a descriptive name for it in the

File name list box. Click Save to save the configuration file to your computer.

Note: See the chapters on commands to edit the configuration text file.

You can change the “.dat” file to a “.txt” file and still upload it to the

MSAP2000 AAMS.

20.5 Load Factory Defaults

From the Maintenance screen, use Restore Default Configuration to clear all

MSAP2000 AAMS configuration information you configured and return to the

factory defaults. Click OK in the following screen.

Figure 66 Confirm Restore Factory Default Settings

Click OK to begin resetting all MSAP2000 AAMS configurations to the factory

defaults and then wait for the MSAP2000 AAMS to restart. This takes up to two

minutes. If you want to access the MSAP2000 AAMS web configurator again, you

may need to change the IP address of your computer to be in the same subnet as

that of the default MSAP2000 AAMS IP address (192.168.1.1).

Figure 67 Restart After Load Factory Defaults

20.6 Reboot System

From the Maintenance screen, use Reboot System to restart the MSAP2000

AAMS without physically turning the power off. Press the Click Here button

next to Reboot System to display the following screen.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 247 248

Pas de commentaire

ZyXEL MSAP2000 Manuel d'utilisateur Page 127