ZyXEL MSAP2000 Manuel d'utilisateur télécharger pdf (Page 208)

208

MSAP2000 AAMS User’s Guide

1 Use the switch vlan set command to configure a VLAN ID (VID 3 in this example)

for managing the MSAP2000 AAMS (the “management” or “CPU” VLAN).

Figure 121 CPU VLAN Configuration and Activation Example

ras> switch vlan set 3 enet1:FT

2 Use the switch vlan cpu command to set VID 3 as the management VLAN.

Figure 122 Deleting Default VLAN Example

ras> switch vlan cpu set 3

27.8.12 VLAN Priority Command

Syntax:

switch vlan priority <portlist> <priority>

where

= You can specify a single port: <1>, all ports: <*>, a list of

ports:

<1,3,enet1>, you can also include a range of ports:

<1,5,6~10,enet1,e

net2>.

<priority> = This is the priority value (0 to 7) to use for incoming

frames with an IEEE 802.1Q VLAN tag.

This command sets the priority of incoming frames with an IEEE 802.1Q VLAN tag.

The following example sets a priority of three for frames (with an IEEE 802.1Q

VLAN tag)

that come in on ADSL port 2.

Figure 123 VLAN Priority Command Example

ras> switch vlan priority 2 3

27.8.13 VLAN Delete Command

Syntax:

switch vlan delete <vlanlist>

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 247 248

Pas de commentaire

ZyXEL MSAP2000 Manuel d'utilisateur Page 208