ZyXEL WAP3205 Manuel d'utilisateur télécharger pdf (Page 40)

Chapter 5 Universal Repeater Mode

WAP3205 v2 User’s Guide

5.7.3 WPA(2)-PSK

Figure 23 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK

The following table describes the labels in this screen.

Encryption Type Select Open or Shared Key from the drop-down list box.

This field specifies whether the wireless clients have to provide the WEP key to log into

the wireless network. Keep this setting at Open unless you want to force a key

verification before communication between the wireless client and the ZyXEL Device

occurs.

Select Shared Key to force the clients to provide the WEP key prior to communication.

ASCII Select this option in order to enter ASCII characters as WEP key.

Hex Select this option in order to enter hexadecimal characters as a WEP key.

The preceding "0x", that identifies a hexadecimal key, is entered automatically.

Key 1 to Key 4 The WEP keys are used to encrypt data. Both the WAP3205 v2 and the access point must

use the same WEP key for data transmission.

If you chose HEX, enter 10 or 26 hexadecimal characters in the range of "A-F", "a-f" and

"0-9" (for example, 11AA22BB33) for a 64-bit or 128-bit WEP key respectively.

If you chose ASCII, enter any 5 or 13 ASCII characters (case sensitive) ranging from "a-

z", "A-Z" and "0-9" (for example, MyKey) for a 64-bit or 128-bit WEP key respectively.

Select a default WEP key to use for data encryption. You must configure at least one key,

only one key can be activated at any one time. The default key is key 1.

Apply Click Apply to save your changes back to the WAP3205 v2.

Cancel Click Cancel to reload the previous configuration for this screen.

Table 17 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP

LABEL DESCRIPTION

Table 18 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK

LABEL DESCRIPTION

Universal Repeater Parameters

Enable Select this option to have the WAP3205 v2 connect to the specified access point.

SSID Enter the name of the access point to which you are connecting.

MAC Address

(Optional)

Enter the MAC address of the access point to which you are connecting.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 193 194

Pas de commentaire

ZyXEL WAP3205 Manuel d'utilisateur Page 40