ZyXEL WAP3205 Manuel d'utilisateur Page 73

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 194
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 72
Chapter 8 Tutorials
WAP3205 v2 User’s Guide
73
8.7 Connecting the WAP3205 v2 (in Client Mode) to an AP
or Wireless Router
If you have an access point or wireless router with Internet access deployed in your network
already, and you want to use the WAP3205 v2 as a wireless client to connect to the existing AP or
wireless router, set the WAP3205 v2 to client mode. The WAP3205 v2 then acts as a wireless client.
Your device, such as a computer, can connect to the WAP3205 v2 through a wired connection to
access the Internet.
1 Set your WAP3205 v2 to work as a wireless client. See Section 2.1.1.1 on page 16.
2 Connect your computer to the LAN port of the WAP3205 v2 using an Ethernet cable.
3 The default IP address of the WAP3205 v2 is “192.168.1.2”. In this case, your computer must have
an IP address in the range between “192.168.1.3” and “192.168.1.254”.
4 Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computers IP address is not in the correct range then see
Appendix C on page 139 for information on changing your computers IP address.
5 After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.2” as the web address in your web browser.
6 Enter “1234” (default) as the password and click Login.
7 Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
8 To connect to a specific wireless network, you can manually create a wireless profile or use the site
survey tool to associate with it.
8.7.1 Connecting to a Wireless Network Using Site Survey
1 Go to Configuration > Network > Wireless LAN > Site Survey. The WAP3205 v2 automatically
scans for and connects to an available wireless network. The green check icon indicates the wireless
device to which the WAP3205 v2 is connecting. Select an SSID’s radio button and click Add Profile
to add this wireless device to a profile.
Vue de la page 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 193 194

Commentaires sur ces manuels

Pas de commentaire