ZyXEL WAP3205 Manuel d'utilisateur Page 70

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 194
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 69
Chapter 8 Tutorials
WAP3205 v2 User’s Guide
70
8.6 Connecting the WAP3205 v2 (in Universal Repeater
Mode) to an AP or Wireless Router
If you have an access point or wireless router with Internet access deployed in your network
already, and you want to have wireless clients connect to the existing AP or wireless router through
the WAP3205 v2, set the WAP3205 v2 to universal repeater mode and then associate the WAP3205
v2 with the AP or wireless router. The WAP3205 v2 must be within the transmission range of the AP
or wireless router.
1 Set your WAP3205 v2 to work as a universal repeater. See Section 2.1.1.1 on page 16.
2 Connect your computer to the LAN port of the WAP3205 v2 using an Ethernet cable.
3 The default IP address of the WAP3205 v2 is “192.168.1.2”. In this case, your computer must have
an IP address in the range between “192.168.1.3” and “192.168.1.254”.
4 Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computers IP address is not in the correct range then see
Appendix C on page 139 for information on changing your computers IP address.
5 After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.2” as the web address in your web browser.
6 Enter “1234” (default) as the password and click Login.
7 Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
8 Go to Configuration > Network > Wireless LAN > Universal Repeater to connect the
WAP3205 v2 wirelessly to an AP. Select Enable. Enter the SSID of the existing AP or wireless router
to which you want to connect (“SSIDofMyAP” in this example). Select the channel number and
enter the wireless security settings which are the same as those on the existing AP or wireless
router to access it (WPA-PSK and “KeyofMyWirelessNetwork” in this example). Click Apply.
Vue de la page 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 193 194

Commentaires sur ces manuels

Pas de commentaire