ZyXEL WAP3205 Manuel d'utilisateur télécharger pdf (Page 43)

WAP3205 v2 User’s Guide 43

CHAPTER 6

Introducing the Web Configurator

6.1 Overview

This chapter describes how to access the WAP3205 v2 Web Configurator and provides an overview

of its screens.

The Web Configurator is an HTML-based management interface that allows easy setup and

management of the WAP3205 v2 via Internet browser. Use Internet Explorer 6.0 and later or Safari

2.0 or later versions. The recommended screen resolution is 1024 by 768 pixels.

In order to use the Web Configurator you need to allow:

• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in

Windows XP SP (Service Pack) 2.

• JavaScripts (enabled by default).

• Java permissions (enabled by default).

Refer to the Troubleshooting chapter (Chapter 13 on page 113) to see how to make sure these

functions are allowed in Internet Explorer.

6.2 Accessing the Web Configurator

1 Connect your computer to the LAN port of the WAP3205 v2.

2 The default IP address of the WAP3205 v2 is “192.168.1.2”. In this case, your computer must have

an IP address in the range between “192.168.1.3” and “192.168.1.254”.

3 Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to

show your computer’s IP address. If your computer’s IP address is not in the correct range then see

Appendix C on page 139 for information on changing your computer’s IP address.

4 After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and

type “http://192.168.1.2” as the web address in your web browser.

6.2.1 Login Screen

The Web Configurator initially displays the following login screen.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 193 194

Pas de commentaire

ZyXEL WAP3205 Manuel d'utilisateur Page 43