ZyXEL WAP3205 Manuel d'utilisateur télécharger pdf (Page 38)

Chapter 5 Universal Repeater Mode

WAP3205 v2 User’s Guide

Note: To have wireless clients access or acquire an IP address from another access point

or wireless router (B) through the WAP3205 v2 (A) in universal repeater mode,

you must set the channel number in the Wireless LAN > General and Wireless

LAN > Universal Repeater screens to be the same as the one on the wireless

router or AP to which the WAP3205 v2 wants to connect.

5.7.1 No Security

Figure 21 Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security

The following table describes the labels in this screen.

Table 16 Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security

LABEL DESCRIPTION

Universal Repeater Parameters

Enable Select this option to have the WAP3205 v2 connect to the specified access point.

SSID Enter the name of the access point to which you are connecting.

MAC Address

(Optional)

Enter the MAC address of the access point to which you are connecting.

Channel Selection Set the operating frequency/channel depending on your particular region.

Select a channel from the drop-down list box. The options vary depending on the

frequency band and the country you are in.

Security Mode Select No Security if the access point to which you want to connect does not use

encryption.

Apply Click Apply to save your changes back to the WAP3205 v2.

Cancel Click Cancel to reload the previous configuration for this screen.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 193 194

Pas de commentaire

ZyXEL WAP3205 Manuel d'utilisateur Page 38