ZyXEL NBG420N Manuel d'utilisateur télécharger pdf (Page 205)

Chapter 17 Bandwidth Management

NBG420N User’s Guide

205

17.9.1 Rule Configuration with the Pre-defined Service

To edit a bandwidth management rule for the pre-defined service in the NBG420N, click the

Edit icon in the Application List table of the Advanced screen. The following screen

displays.

Figure 123 Bandwidth Management Rule Configuration: Pre-defined Service

The following table describes the labels in this screen.

17.9.2 Rule Configuration: User Defined Service Rule Configuration

If you want to edit a bandwidth management rule for other applications and/or subnets, click

the Edit icon in the User-defined Service table of the Advanced screen. The following screen

displays.

Table 77 Bandwidth Management Rule Configuration: Pre-defined Service

LABEL DESCRIPTION

# This is the number of an individual bandwidth management rule.

Enable Select an interface’s check box to enable bandwidth management on that

interface.

Direction These read-only labels represent the physical interfaces. Bandwidth management

applies to all traffic flowing out of the router through the interface, regardless of

the traffic’s source.

Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the

NBG420N and be managed by bandwidth management.

Bandwidth Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum

or minimum bandwidth allowed for the rule in kilobits per second.

Destination Port This is the port number of the destination. See Appendix F on page 321 for some

common services and port numbers.

Source Port This is the port number of the source. See Appendix F on page 321 for some

common services and port numbers.

Protocol This is the protocol (TCP or UDP) used for the service.

OK Click OK to save your customized settings.

Cancel Click Cancel to exit this screen without saving.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 339 340

Pas de commentaire

ZyXEL NBG420N Manuel d'utilisateur Page 205