ZyXEL NBG420N Manuel d'utilisateur télécharger pdf (Page 273)

NBG420N User’s Guide

273

APPENDIX A

Product Specifications and Wall-

Mounting Instructions

The following tables summarize the NBG420N’s hardware and firmware features.

Table 113 Hardware Features

Dimensions (W x D x H) 115 x 162 x 33 mm

Weight 230g

Power Specification Input: 120~240 AC, 50~60 Hz

Output: 12 V DC 1 A

Ethernet ports Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex

mode.

Auto-crossover: Use either crossover or straight-through Ethernet cables.

4-5 Port Switch A combination of switch and router makes your NBG420N a cost-effective

and viable network solution. You can add up to four computers to the

NBG420N without the cost of a hub when connecting to the Internet through

the WAN port. You can add up to five computers to the NBG420N when you

connect to the Internet in AP mode. Add more than four computers to your

LAN by using a hub.

LEDs PWR, LAN1-4, WAN, WLAN, WPS

Reset Button The reset button is built into the rear panel. Use this button to restore the

NBG420N to its factory default settings. Press for 1 second to restart the

device. Press for 5 seconds to restore to factory default settings.

WPS button Press the WPS on two WPS enabled devices within 120 seconds for a

security-enabled wireless connection.

Antenna The NBG420N is equipped with two 1.8dBi (2.4GHz) detachable antennas

to provide clear radio transmission and reception on the wireless network.

Operation Environment Temperature: 0º C ~ 40º C

Humidity: 20% ~ 95% RH (Non-condensing)

Storage Environment Temperature: -20º C ~ 60º C

Humidity: 20% ~ 95% RH (Non-condensing)

Distance between the

centers of the holes on

the device’s back.

120 mm

Screw size for wall-

mounting

M4 Tap Screw

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 339 340

Pas de commentaire

ZyXEL NBG420N Manuel d'utilisateur Page 273