ZyXEL NBG420N Manuel d'utilisateur télécharger pdf (Page 211)

Chapter 18 Remote Management

NBG420N User’s Guide

211

18.3 Telnet

You can use Telnet to access the NBG420N’s command line interface. Specify which

interfaces allow Telnet access and from which IP address the access can come.

18.4 Telnet Screen

To change your NBG420N’s Telnet settings, click Management > Remote MGMT > Telnet.

The following screen displays.

Figure 127 Management > Remote MGMT > Telnet

The following table describes the labels in this screen.

Secured Client IP

Address

A secured client is a “trusted” computer that is allowed to communicate with the

NBG420N using this service.

Select All to allow any computer to access the NBG420N using this service.

Choose Selected to just allow the computer with the IP address that you specify to

access the NBG420N using this service.

Apply Click Apply to save your customized settings and exit this screen.

Reset Click Reset to begin configuring this screen afresh.

LABEL DESCRIPTION

Table 80 Management > Remote MGMT > Telnet

LABEL DESCRIPTION

Server Port You may change the server port number for a service if needed, however you must

use the same port number in order to use that service for remote management.

Server Access Select the interface(s) through which a computer may access the NBG420N using

this service.

Secured Client

IP Address