ZyXEL NBG420N Manuel d'utilisateur télécharger pdf (Page 61)

Chapter 4 Connection Wizard

NBG420N User’s Guide

4.4.9 WAN MAC Address

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address

is assigned at the factory and consists of six pairs of hexadecimal characters, for example,

00:A0:C5:00:00:02.

This screen allows users to configure the WAN port's MAC address by either using the

NBG420N’s MAC address, copying the MAC address from a computer on your LAN or

manually entering a MAC address. Once it is successfully configured, the address will be

copied to the "rom" file (ZyNOS configuration file). It will not change unless you change the

setting or upload a different "rom" file. It is advisable to clone the MAC address from a

computer on your LAN even if your ISP does not presently require MAC address

authentication.

Figure 26 Wizard Step 3: WAN MAC Address

The following table describes the fields in this screen.

Table 20 Example of Network Properties for LAN Servers with Fixed IP Addresses

Choose an IP address 192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.

Subnet mask 255.255.255.0

Gateway (or default route) 192.168.1.1(NBG420N LAN IP)

Table 21 Wizard Step 3: WAN MAC Address

LABEL DESCRIPTION

Factory Default Select Factory Default to use the factory assigned default MAC address.

Clone the

computer’s MAC

address

Select this option and enter the IP address of the computer on the LAN whose

MAC you are cloning. It is advisable to clone the MAC address from a computer

on your LAN even if your ISP does not presently require MAC address

authentication.

Set WAN MAC

Address

Select this option and enter the MAC address you want to use.

Back Click Back to return to the previous screen.

Next Click Next to continue.

Exit Click Exit to close the wizard screen without saving.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 339 340

Pas de commentaire

ZyXEL NBG420N Manuel d'utilisateur Page 61