ZyXEL NBG420N Manuel d'utilisateur télécharger pdf (Page 45)

Chapter 3 Introducing the Web Configurator

NBG420N User’s Guide

Figure 8 Summary: BW MGMT Monitor

3.5.4 Summary: DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual

clients to obtain TCP/IP configuration at start-up from a server. You can configure the

NBG420N’s LAN as a DHCP server or disable it. When configured as a server, the NBG420N

provides the TCP/IP configuration for the clients. If DHCP service is disabled, you must have

another DHCP server on that network, or else the computer must be manually configured.

Click the DHCP Table (Details...) hyperlink in the Status screen. Read-only information here

relates to your DHCP status. The DHCP table shows current DHCP client information

(including IP Address, Host Name and MAC Address) of all network clients using the

NBG420N’s DHCP server.

Figure 9 Summary: DHCP Table

The following table describes the labels in this screen.

Table 6 Summary: DHCP Table

LABEL DESCRIPTION

# This is the index number of the host computer.

IP Address This field displays the IP address relative to the # field listed above.

Host Name This field displays the computer host name.

MAC Address This field shows the MAC address of the computer with the name in the Host Name

field.

Every Ethernet device has a unique MAC (Media Access Control) address which

uniquely identifies a device. The MAC address is assigned at the factory and consists

of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.

Refresh Click Refresh to renew the screen.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 339 340

Pas de commentaire

ZyXEL NBG420N Manuel d'utilisateur Page 45