ZyXEL P-2302R Manuel d'utilisateur télécharger pdf (Page 136)

100

101

P-2302R Series User’s Guide

135 Chapter 12 Network Address Translation (NAT) Screens

12.5 Configuring Address Mapping

Ordering your rules is important because the Prestige applies the rules in the order that you

specify. When a rule matches the current packet, the Prestige takes the corresponding action

and the remaining rules are ignored. If there are any empty rules before your new configured

rule, your configured rule will be pushed up by that number of empty rules. For example, if

you have already configured rules 1 to 6 in your current set and now you configure rule

number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if you delete rule

4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new rules 4, 5 and 6.

To change your Prestige’s address mapping settings, click SUA/NAT, then the Address

Mapping tab. The screen appears as shown.

End Port Type a port number in this field.

To forward only one port, type the port number in the Start Port field above and

then type it again in this field.

To forward a series of ports, type the last port number in a series that begins with

the port number in the Start Port field above.

Server IP

Address

Enter the inside IP address of the server here.

Apply Click Apply to save your changes back to the Prestige.

Reset Click Reset to begin configuring this screen afresh.

Table 35 SUA/NAT Setup

LABEL DESCRIPTION

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 383 384

Commentaires sur ces manuels

Pas de commentaire

ZyXEL P-2302R Manuel d'utilisateur Page 136

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs ZyXEL P-2302R