ZyXEL P-2302R Manuel d'utilisateur télécharger pdf (Page 56)

P-2302R Series User’s Guide

55 Chapter 3 Wizard Setup

My WAN IP Address Enter your WAN IP address in this field if you selected Use Fixed IP

Address.

My WAN IP Subnet Mask

(Ethernet only)

Enter the IP subnet mask (if your ISP gave you one) in this field if you

selected Use Fixed IP Address.

Gateway IP Address

(Ethernet only)

Enter the gateway IP address of the neighboring device, if you know it. If

you do not, leave the field set to 0.0.0.0.

My WAN IP Subnet Mask This field is available if you selected Ethernet encapsulation. Enter the IP

subnet mask (if your ISP gave you one) in this field if you selected Use

Fixed IP Address.

Gateway IP Address This field is available if you selected Ethernet encapsulation. Enter the

gateway IP address (if your ISP gave you one) in this field if you selected

Use Fixed IP Address.

Remote IP Address This field is available if you selected PPPoE encapsulation. Enter the

remote IP Address (if your ISP gave you one) in this field.

Remote IP Subnet Mask This field is available if you selected PPPoE encapsulation. Enter the

remote IP Address (if your ISP gave you one) in this field.

DNS Server Address Assignment (if applicable)

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice

versa. The DNS server is extremely important because without it, you must know the IP address of a

computer before you can access it. The Prestige uses a system DNS server (in the order you specify

here) to resolve domain names for VPN, DDNS and the time server.

First DNS Server

Second DNS Server

Third DNS Server

Select From ISP if your ISP dynamically assigns DNS server information

(and the Prestige's WAN IP address). The field to the right displays the

(read-only) DNS server IP address that the ISP assigns.

Select User-Defined if you have the IP address of a DNS server. Enter the

DNS server's IP address in the field to the right.

Select None if you do not want to configure DNS servers. If you do not

configure a system DNS server, you must use IP addresses when

configuring VPN, DDNS and the time server.

WAN MAC Address The MAC address field allows you to configure the WAN port's MAC

address by either using the factory default or cloning the MAC address

from a computer on your LAN.

Factory Default Select this option to use the factory assigned default MAC Address.

Spoof this Computer's

MAC address - IP Address

Select this option and enter the IP address of the computer on the LAN

whose MAC you are cloning. Once it is successfully configured, the

address will be copied to the rom file (ZyNOS configuration file). It will not

change unless you change the setting or upload a different rom file. It is

advisable to clone the MAC address from a computer on your LAN even if

your ISP does not presently require MAC address authentication.

Back Click Back to return to the previous screen.

Next Click Next to continue.

Table 6 Wizard 3: WAN Setup

LABEL DESCRIPTION

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 383 384

Commentaires sur ces manuels

Pas de commentaire

ZyXEL P-2302R Manuel d'utilisateur Page 56

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs ZyXEL P-2302R