ZyXEL P-2302R Manuel d'utilisateur télécharger pdf (Page 244)

P-2302R Series User’s Guide

243 Chapter 25 Internet Access

25.3 Configuring the PPPoE Client

If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE,

please see the appendix.

Table 102 Internet Access Setup (Ethernet)

FIELD DESCRIPTION

ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP. This

information is for identification purposes only.

Encapsulation Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The

encapsulation method influences your choices for the IP Address field.

Service Type Press [SPACE BAR] and then [ENTER] to select Standard, RR-Toshiba

(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner

Manager authentication method) or RR-Telstra. Choose a RoadRunner flavor

if your ISP is Time Warner's RoadRunner; otherwise choose Standard.

Note: DSL users must choose the Standard option only. The My Login, My Password and Login

Server fields are not applicable in this case.

My Login Enter the login name given to you by your ISP.

My Password Type your password again for confirmation.

Retype to Confirm Enter your password again to make sure that you have entered is correctly.

does not, then you must enter the authentication server IP address.

IP Address Assignment If your ISP did not assign you a fixed IP address, press [SPACE BAR] and

then [ENTER] to select Dynamic, otherwise select Static and enter the IP

address and subnet mask in the following fields.

IP Address Enter the (fixed) IP address assigned to you by your ISP (static IP address

assignment is selected in the previous field).

IP Subnet Mask Enter the subnet mask associated with your static IP.

Gateway IP Address Enter the gateway IP address associated with your static IP.

Network Address

Translation

Network Address Translation (NAT) allows the translation of an Internet

protocol address used within one network (for example a private IP address

used in a local network) to a different IP address known within another

network (for example a public IP address used on the Internet).

Choose None to disable NAT.

Choose SUA Only if you have a single public IP address. SUA (Single User

Account) is a subset of NAT that supports two types of mapping: Many-to-

One and Server.

Choose Full Feature if you have multiple public IP addresses. Full Feature

mapping types include: One-to-One, Many-to-One (SUA/PAT), Many-to-

Many Overload, Many- One-to-One and Server. When you select Full

Feature you must configure at least one address mapping set!

Please see Chapter 12 on page 128 for a more detailed discussion on the

Network Address Translation feature.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to

save your configuration, or press [ESC] at any time to cancel.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 383 384

Commentaires sur ces manuels

Pas de commentaire

ZyXEL P-2302R Manuel d'utilisateur Page 244

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs ZyXEL P-2302R