ZyXEL P-2302R Manuel d'utilisateur télécharger pdf (Page 68)

P-2302R Series User’s Guide

67 Chapter 4 System Screens

4.7 Configuring Password

To change your Prestige’s password (recommended), click SYSTEM in the navigation panel,

and then the Password tab. The screen appears as shown.

Figure 17 Password

The following table describes the labels in this screen.

DDNS server auto

detect IP Address

Select this option to update the IP address of the host name(s) automatically

by the DDNS server. It is recommended that you select this option.

Select this option only when there are one or more NAT routers between the

Prestige and the DDNS server. This feature has the DDNS server

automatically detect and use the IP address of the NAT router that has a

public IP address.

Note: The DDNS server may not be able to detect the proper

IP address if there is an HTTP proxy server between the

Prestige and the DDNS server.

Use specified IP

Address

Select this option to update the IP address of the host name(s) to the IP

address specified below. Use this option if you have a static IP address.

IP Addr: Enter the IP address if you select the User Specify option.

Apply Click Apply to save your changes back to the Prestige.

Reset Click Reset to begin configuring this screen afresh.

Table 9 DDNS

LABEL DESCRIPTION

Table 10 Password

LABEL DESCRIPTION

Old Password Type the default password or the existing password you use to access the

system in this field.

New Password Type the new password in this field (up to 30 characters). Note that as you type

a password, the screen displays an asterisk (*) for each character you type.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 383 384

Pas de commentaire

ZyXEL P-2302R Manuel d'utilisateur Page 68