ZyXEL NBG420N Manuel d'utilisateur télécharger pdf (Page 115)

Chapter 7 Wireless LAN

NBG420N User’s Guide

115

" If you have not configured your wireless settings yet you can do so by using

the Wizard in the web configurator you access from your computer. Click the

Wizard icon or the Go To Wizard Setup web link you see after logging

into the web configurator from your computer. See Chapter 4 on page 49 for

more information on using the Wizard.

1 On the iPod Touch’s main screen press Settings and then press Wi-fi.

2 On the list of networks press the NBG420N’s network name (SSID) to connect to it. If

you are prompted for any security settings enter them and press connect.

V The pre-shared key is case-sensitive. If you have problems connecting then

try checking the security settings in the web configurator from your computer

and try again.

7.11.1 Accessing the iPod Touch Web Configurator

Now that you are connected to the NBG420N’s wireless network you can access the iPod

Touch web configurator. To do this follow the steps below:

1 Launch the iPod Touch’s web browser from the main screen. The default web browser is

Safari.

2 Enter the IP address of the NBG420N into the address bar and go to that address. The

default IP address for the NBG420N is 192.168.1.1.

3 The login screen should display.

Figure 77 Login Screen

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 339 340

Pas de commentaire

ZyXEL NBG420N Manuel d'utilisateur Page 115