ZyXEL NBG420N Manuel d'utilisateur télécharger pdf (Page 71)

Chapter 5 AP Mode

NBG420N User’s Guide

5.4.2 WLAN and Maintenance Settings

The configuration of wireless and maintenance settings in AP Mode is the same as for Router

Mode.

• See Chapter 5 on page 69 for information on the configuring your wireless network.

• See Maintenance and Troubleshooting (227) for information on the configuring your

Maintenance settings.

5.5 Logging in to the Web Configurator in AP Mode

1 Connect your computer to the LAN port of the NBG420N.

2 The default IP address if the NBG420N is “192.168.1.1”. In this case, your computer

must have an IP address in the range between “192.168.1.2” and “192.168.1.255”.

3 Click Start > Run on your computer in Windows.

4 Type “cmd” in the dialog box.

5 Type “ipconfig” to show your computer’s IP address. If your computer’s IP address is

not in the correct range then see Appendix D on page 293 for information on changing

your computer’s IP address.

6 After you’ve set your computer’s IP address, open a web browser such as Internet

Explorer and type “192.168.1.1” as the web address in your web browser.

See Chapter 6 on page 73 for a tutorial on setting up a network with an AP.

Apply Click Apply to save your changes to the NBG420N.

Reset Click Reset to reload the previous configuration for this screen.

LABEL DESCRIPTION

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 339 340

Pas de commentaire

ZyXEL NBG420N Manuel d'utilisateur Page 71